NEC UX5000 Manual Download

Page: 533 / 588

Tools

Local Backup, Local Restore, and Local Archive

UX Mail Manual

Chapter 3: Programming

◆

515

Tools

Local Backup, Local Restore, and Local Archive

Description

The

Local Backup, Local Restore,

and

Local Archives

options provide a method for backing up the voice

mail database, storing the database on your PC, and restoring the saved data back into the system. The chart
below outlines this procedure. Turn to

for the spe-

cifics on each step.

Local Backup Options

Use

Local Backup

to back up your voice mail database to the voice mail CompactFlash card. This is

Part

of the

Backup, Restore, and Archive Procedure

starting on page 518. Use the following options to spec-

ify the type of backup you want to make.

●

System Configuration Database
- This is your voice mail programming and outgoing messages (such as Greetings, Welcome Mes-

sages, Instruction Menu Messages, and Interactive Prompts).

- The options are

Yes

●

Feature Files
- Always leave this option as

●

Messaging Mailboxes
- This is the list of mailboxes you want to back up.
- The options are

All

None

, or a

list

of mailboxes (e.g., 301, 302, 310). The list can be up to 200

characters long.

●

New Voice Messages
- Back up all new messages in the selected mailboxes.
- The options are

Yes

●

Held Voice Mail Messages

Compatibility Guidelines:

■

Local Backup, Restore, and Archive may cause interruption of normal voice mail operations.

Part 1

Create Backup

Part 2

Convert to Archive

Part 3

Save Archive to PC

Part 4

Upload Archive to UX

Part 5

Convert to Backup

Part 6

Restore Backup

Summary of Contents for UX5000













































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands