Setup and Operation 2-21
Setup Keys
Refer to Table 2-5 for a description of Setup Key functions.
Table 2-5 Setup Key Functions
Key
Function
Tab
Moves cursor to another field in the menu. For example, pressing
Tab moves the cursor up or down a list of current parameters.
Up or down arrow
Moves the cursor between the displayed parameters.
Pg Up/Pg Down
Moves to previous/next page on scrollable menus.
-–/+
Selects lower/higher value.
F9
Loads factory-installed Setup default values for the displayed
parameters only.
F10
Restores previous values from CMOS.
Esc
Displays the Exit screen
Enter
Selects the parameter sub menu.
CHANGING/SETTING PARAMETER SETTINGS
Use the following steps to set or change parameter settings:
NOTE:
Selecting incorrect values may cause a
system boot failure. Load Setup default values to
recover.
1.
Select a parameter menu from the menu bar by moving the cursor to the word
that represents the screen you want to display.
For example, to select "Peripherals," press the arrow key until the word Peripher-
als is highlighted. A screen appears with the current setting for each peripheral
device.
2.
View the parameter settings by pressing the space bar or the
+
key. The choices
appear, toggling from one to another as you press.
3.
When you reach the setting you want, leave it and move to the next parameter to
be changed.
4.
When you are through viewing or changing parameters, press
ESC
to move to
the Exit screen.
5.
The Exit screen displays a list of options. Press
Enter
to select "Save Changes
and Exit". The screen displays a prompt confirming that the changes were made.
