4-12 Field Service Guidelines
Power Button, IR Board, Keyboard
Remove the power button, IR board and/or keyboard as follows.
1.
Remove the LCD and top cover as previously described.
2.
The power button is held in place primarily by the computer’s top cover. Once the
top cover is removed, just lift the power button out of its retaining inserts.
3.
Remove the IR board as follows.
■
Remove the screws securing it in place.
■
Locate the IR board cable that attaches to connector P7 on the CPU board.
Use a flat-head screwdriver to push open the connector tabs.
■
Lift up the IR board.
Figure 4-9 Removing the Power Button, IR Board
