System Configuration and Setup 2-17
To set the date, use the
Tab
or arrow keys to move from field to field. Use
the
PgUp
or
PgDn
key to change the numbers within each field.
System Memory — Displays the amount of system memory currently
installed in your system.
Time — Set the time, enter the current hour, minute, and second in
hr/min/sec, 24-hour format.
To set the time use the
Tab
or arrow keys to move from field to field. Use
the
PgUp
or
PgDn
key to change the numbers within each field.
Diskette Drives — Lets you designate the drive type for your diskette
drives.
Internal Drives — Allows you to assign devices to the internal drive(s),
file bay and VersaBay, in your system.
Docking Station Drives — Enables and disables the drives installed in a
docking station. (These options are only available when the NEC Versa is
docked.)
Boot Sector Virus Protection — Write protects the boot sector of the hard
disk drive to avoid infection by some virus types.
Advanced CMOS Setup
Advanced CMOS settings let you define the following functions.
Video Out Type — Specifies the signal type used by the video device
connected to the TV Out Port.
LCD Panel View Expansion — Specifies whether the panel view is
reduced/off or expanded/on.
PS/2 Port Warm Swap — Specifies whether or not you can swap a PS/2
device during system operation.
Internal Mouse — Specifies whether or not you can use both the internal
and the external mouse.
Graphics Aperture Size — Sets the graphics aperture size used by the
AGP video device.
System Security Setup
Change Supervisor Password — Allows you to establish password
protection for entering the BIOS setup utility, booting the system, and
resuming from Suspend mode.
Change User Password — Allows you to establish a user password once
a Supervisor password is set.
Boot Password Required — Indicates whether or not a password is
required during system boot.
Summary of Contents for Versa LX
