Using the BIOS Setup Utility 3-9
!
Assign Supervisor Password — Establishes password protection for entering the
BIOS Setup Utility, booting the system, and resuming from Standby. (Resume from
Standby, not applicable in Windows 2000/98 with ACPI.)
!
Assign User Password — Establishes a user password once a supervisor password
is set.
!
Boot Password Required — Indicates whether or not a password is required during
system boot.
!
Resume Password required — Indicates whether or not a password is required
during system resume. Boot Password must be defined to activate this parameter.
!
Assign Supervisor SmartCard — Accessible when the optional SmartCard
accessory is installed. For details, refer to the documentation that ships with the
accessory.
!
Assign User SmartCard — Accessible when the optional SmartCard accessory is
installed. For details, refer to the documentation that ships with the accessory.
!
Clear Supervisor SmartCard — Accessible when the optional SmartCard accessory
is installed. For details, refer to the documentation that ships with the accessory.
!
Clear User SmartCard — Accessible when the optional SmartCard accessory is
installed. For details, refer to the documentation that ships with the accessory.
!
Assign Supervisor FingerPrint — Accessible when the optional FingerPrint
accessory is installed. For details, refer to the documentation that ships with the
accessory.
!
Assign User FingerPrint — Accessible when the optional FingerPrint accessory is
installed. For details, refer to the documentation that ships with the accessory.
!
Clear Supervisor FingerPrint — Accessible when the optional FingerPrint accessory
is installed. For details, refer to the documentation that ships with the accessory.
!
Clear User FingerPrint — Accessible when the optional FingerPrint accessory is
installed. For details, refer to the documentation that ships with the accessory.
!
Assign HDD Password — Allows you to assign a password to allow or restrict
access to the hard disk drive contents.
!
Internal HDD Password — Enables or disables the HDD password.
!
VersaBay HDD password — Enables or disables the VersaBay III password.
!
DS Internal HDD Password — Enables or disables the HDD password for the
docking station’s internal hard disk drive.
!
DS VersaBay HDD password — Enables or disables the docking station’s
VersaBay III password.
Summary of Contents for Versa LXi
