System Configuration and Setup 2-17
7.
Highlight and select Internal HDD Password and use the
PgUp/PgDn
keys to enable the
selection. (Follow this step to enable password protection for the internal HDD.)
8.
Highlight and select VersaBay HDD Password and use the
PgUp/PgDn
keys to enable the
selection. (Follow this step to enable password protection for an HDD installed in the NEC
VersaBay III.)
Changing Hard Disk Drive Passwords
To change hard disk drive passwords, enter the System Security Setup, highlight Internal HDD
Password and enter the current password that you want to change. If you enter the current master
password, you are prompted to enter a new master password. If you enter the current user
password, you are prompted to enter the new user password. If you do not want to establish a
new master or user password, press
Esc
instead of entering a new password.
Using Hard Disk Drive Password Protection
To facilitate the transfer of one or more HDDs between systems, establish a single master
password (and store the password in a secure place). Forgetting your master password results in
the inability to access the data on your hard drive. Establish different user passwords to limit
access to specific systems.
If you set the master and user password on a hard drive, the
passwords can never be removed. They can be changed. If the master password is forgotten and
the drive is installed in another system, you cannot access the data on the hard drive.
If the hard drive is installed in another NEC Versa system with hard disk drive security enabled,
the password must be entered to allow access to the hard drive. If this NEC Versa system does
not support hard disk drive security, you cannot access the data on the hard drive.
With hard disk drive security enabled on the original NEC Versa system, the system boots
normally.
If the hard drive is installed in another NEC Versa system with security enabled, you must enter
the master password to access the hard disk drive. If the hard drive is installed in another NEC
Versa system with security disabled, you are prompted to enter the master password and then a
new user password.
Moving the Hard Disk Drive
When a password protected HDD is moved from its original system and installed in another
system, error messages appear indicating that the drive is locked. Next, the Security Setup
screen appears requiring the user to enter the master password to unlock the drive. Highlight the
HDD password line and enter the master password, when prompted.
To take advantage of HDD password protection in another system, the system must be equipped
with the same HDD password protection feature. To determine if the system has HDD
password, check the System Security Setup in the BIOS setup to see if there are provisions for
establishing HDD passwords.
Summary of Contents for Versa LXi
