NEC Versa M320 Disassembly Manual
Page 22
Removing the Audio Board
To remove the Audio board, first remove the Top Cover (see
Removing the Top Cover
),
remove the FDD (see
Removing the FDD
) then perform the following steps:
1. Remove the screws on the Audio board and disconnect the speaker cable as shown in
Fig. 39 .
Fig. 39 Audio Board screws and speakers connector
2. Carefully remove the audio front panel as shown in Fig. 40 and put it aside.
Fig. 40 Removing the audio front panel
3. Lift up the audio board as shown in Fig. 41 and put it aside.
M2x4.5 Silver
