NEC VERSA M350/P550 Disassembly Manual
Page 14
Note:
Beware of screws use on the CPU heat sink! Make sure to use the screw size M2.5x7, otherwise it
might cause damage to the CPU die. Secure the screw around the CPU socket first before other screws.
5. Use Flat screwdriver to unlock the CPU from the CPU socket and lift up the CPU carefully.
Fig. 16 Unlocking the CPU
Removing the CPU (For K2ST)
To remove the CPU first remove the battery (see
Removing the Battery
) and remove the
Keyboard (see
Removing the Keyboard
) then perform the following steps:
1. Remove the screws retaining the Heat Plate as shown in Fig. 17
Fig. 17 Removing the screws retaining Heat Plate
M2.5 x 7 Sliver
