NEC Versa P700 Disassembly Manual
Page 26
Fig. 51:
Removing screws on back of notebook
7. Removed the screws marked below.
Fig. 52:
Removing main board screws
8. Carefully extract the main board from the base assembly.
Note:
Underneath the main board there is still the video board connected. If the memory module, the
Wireless Mini PCI Card and the modem have not previously been removed, they will also be still on the
motherboard on the same side as the video board. Please refer to
Removing the Wireless Mini PCI Card
,
,
for instructions on the removal of
such parts.
Removing the Video Board
To remove the video board, first remove the main board (see
follow the next steps:
1. Take the main board and flip it over.
(HEX 5 mm)
A
(HEX 16 mm)
B
(HEX 10 mm)
C
(HEX 12 mm)
D
(HEX 12 mm
w/groove)
E
(HEX 7 mm
w/groove)
F
(HEX 8 mm)
G
(M2x4
)
H
(
Cone 2.5x3
)
J
(M2x3)
K (
M2.5x3)
