- 13 -
Power Cables
This equipment requires a 3-wire, grounded power cord. The cord length must not exceed 2.5 metres. To
prevent electrical hazards, do not remove or disable the ground contact on the power cord. Replace the
power cord if it gets damaged. Contact your dealer for an exact replacement. In Europe, the plug must be
rated for 250 VAC, 10 amp minimum. In the U.S.A. and Canada, the plug must be rated for 125 VAC, 10
amp minimum. The plug must display an international agency approval marking. The cord must be suitable
for use in the end-user country. Consult your dealer or the local electrical authorities if you are unsure of the
type of power cord to use in your country.
Cables
The EMC performance of the system is guaranteed only if the cable and interface use efficient shielding.
The use of shielded interface cable is required for USB, IEEE1394, serial, printer, game, analogue or digital
audio/video, Ethernet LAN, PS2, TV or FM antennas, and generally all high speeds cables’ interfaces.
Only Ethernet LAN or RTC modem cable can have lengths exceeding 3 meters.
For Ethernet LAN cable, use FTP shielded cables only (cat
≥
5).
Heat build-up
The AC adapter and the underside of the computer can become hot after prolonged use. Sustained physical
contact with either should be avoided.
Batteries
Batteries
Batteries
Batteries
Replacing batteries
A lithium-battery in some computers maintains system configuration information. In the event that the battery fails
to maintain system configuration information, we recommend that you replace the battery. For battery replacement
information, call your dealer or your Customer Assistance Centre.
Unauthorized repairs or changes of battery cells or whatever parts in a battery-pack will void the safety and fire
warranty.
WARNING
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.
Battery Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations. Do not dispose
of used batteries in your regular waste incinerator, landfilis or mix batteries with municipal solid–waste- stream as
it is prohibited by law in most countries.
Contact your local waste management officials for other information regarding environment-friendly -safe
collection, recycling and disposal of used batteries.
Laser Compliance Statement
Laser Compliance Statement
Laser Compliance Statement
Laser Compliance Statement
The optical devices are tested and certified to be compliant with the International Electro-technical Commission
IEC825-1 and the European Norm EN60825-1 and the EN60825-2 regulations for Class 1 laser products.
Class 1 laser products are not considered hazardous. The optical devices are designed such that there is
never human access to laser radiation above a Class 1 level during normal operation or prescribed
maintenance conditions.
The optical devices installed in your computer are designed for use solely as components of such electronic
products and therefore do not comply with the appropriate requirements of Code of Federal Regulation Sec.
1040.10 and Sec. 1040.11 for COMPLETE laser products.
