NEC Versa S940/PB EasyNote A7 Disassembly Manual
Page 23
Removing the Speaker Assembly
To remove the Speaker Assembly, first remove the Main Board (see
Removing the Main
Board
) then perform the following steps:
1. Remove the screws holding Speaker Assembly as shown in Fig. 32
Fig. 32 Speaker Assembly
2. Carefully remove the Speaker assembly from Bottom Cover and place it aside.
Removing the Touch Pad
To remove the touch pad, first remove the top cover (see
Removing the Top Cover
),
then
perform the following steps:
1. Unscrew the screws on the Top Cover as shown in Fig. 33
Fig. 33 Touch Pad
2. Carefully separate the Touch Pad module from Top cover.
M2x4 Silver
A = M2x4 Silver
B = M2.5x2.5
Silver
