3-4
Disassembly and Reassembly
NEC VersaBay III
Use the following steps to remove a device from the NEC VersaBay III.
1.
Close the LCD panel and turn the system upside down.
2.
Locate the NEC VersaBay III release lock and release latch on the bottom of the unit.
Locating the VersaBay III lock and latch
A
– Latch
B
–Lock
3.
Slide the lock to the unlocked position before releasing the latch.
4.
Slide the latch toward the rear of the system and hold it.
5.
Pull the device out of the system.
Note
If you release the latch before completely removing the device, the device casing
catches on the inside of the latch.
Removing the device
Summary of Contents for VERSA SXI
