3-2
Disassembly and Reassembly
Required Tools and Equipment
All NEC Versa UltraLite/DayLite notebook disassembly/reassembly procedures are performed
using the following tools:
!
set of small Phillips screwdrivers (small and large #0 and #1)
!
set of small flat-head screwdrivers (1/32 inch through 1/8 inch)
!
magnifying glass
!
tweezers.
Disassembly
This section contains step-by-step disassembly procedures for the system. Reassembly is the
reverse of disassembly. Each procedure is supported by a simplified disassembly illustration.
The Illustrated Parts Breakdown and parts lists for the system unit are shown in Chapter 5.
For complete disassembly of the system, follow the disassembly order in the following table.
For disassembly of a specific part, go the section containing the part removal procedure.
NEC Versa UltraLite/DayLite Notebook Disassembly Sequence
Sequence
Part Name
Page
1
Secondary Battery
3-3
2
Memory Module
3-4
3
Hard Drive
3-5
4
Keyboard
3-6
5
Top Cover Assembly
3-7
6
Speaker
3-9
CMOS Battery
3-9
7
USB Connector Board
3-9
8
Mini PCI Board
3-10
10
Power Switch Board
3-10
11
Main Board
3-11
12
Processor Assembly
3-12
13
Communication Board
3-12
14
LCD Panel
3-13
When disassembling the notebook, follow these general rules.
!
Record the BIOS settings before disassembling the notebook. All customized BIOS settings
are lost if the CMOS battery is disconnected.
Summary of Contents for VERSA ULTRALITE
