ISSUED: 11-16-05 SHEET #: 055-9447-2
Visit the Peerless Web Site at www.peerlessmounts.com
6 of 8
For customer service call 1-800-729-0307 or 708-865-8870.
Accessories listed in the included sheet, as well as other parts,
can be ordered through Peerless by calling 1-800-729-0307 or
visiting www.peerlessindustries.com.
Note: The projector you are installing may differ in appearance from the sample illustrated below.
Align shoulder on connection block opposite notch in adapter plate. Attach adapter plate (H) to connection block from
projector mount assembly (A) using two #10-32 x 3/8" serrated washer head socket pin screws (C) as shown.
CONNECTION BLOCK
C
NOTCH INDICATES
FRONT OF PROJECTOR
SHOULDER
H
Flip projector upside down. Find your projector from the models listed below. Using the holes indicated on the
corresponding hole pattern diagram, attach adapter plate (H) to projector using two M4 x 20 mm serrated washer
head socket pin screws (I) and two .198 x .313 x .5 retaining spacers (J).
Notes:
Retaining spacers go between adapter plate and projector.
A. VT37, VT47, VT470, VT570, VT575, VT670,
VT676, LT280, LT380
B. VT46, VT460, VT465, VT560, VT660, VT660k
C. VT48, VT480, VT580
H
*
H
*
H
*
