NEC Xen Master Programming Manual Download

Page: 534 / 536

NEC Business Solutions Pty Ltd

Xen Master & Xen Axis

1 - 516

PC Programming

A6-3240

00-642-

02 - R

elea

se 5.0

May 2003

Verify

This option allows the technician to compare the configuration programmed in the
KTS with that of the PC.

First Initialisation

This option reinitialises the system to the factory-set defaults.

All active calls on the system are dropped.

Second Initialization

This option reboots the system without resetting the programmed defaults (i.e., all
programming is retained).

Setup

This option allows the technician to set up the system to provide communication.
Four options are available for this selection.

PC Serial Port — serial port of the PC that is connected to the KTS.

End User Password — the password programmed in Memory Block 1-8-
17 on the KTS.

Site Name — the name of the site that is being programmed.

Setup & Initialize — the KTS port settings/configurations.

Help

The Help pulldown menu allows access to online help.

Using Help

This option provides access to the help topics window that describes how to use
the help function.

Figure 3-11 Help Menu

Summary of Contents for Xen Master

























































































































































































































































































































































































































































































































































Search results

Summary of Contents for Xen Master

Reviews:

Related manuals for Xen Master

Brands by name

Popular brands

NEC Xen Master, Programming Manual

Search results

Summary of Contents for Xen Master

Reviews:

Related manuals for Xen Master

Brands by name

Popular brands