6
5
If your call doesn’t go through…
Placing Calls Quickly
Intercom numbers can also be stored under Last Number Redial. Ask your NEC Authorised Supplier for
details.
Last Number Redial < Outside/Intercom Calls>
LND
VOL
Redial List
The system retains the last 10 numbers dialled which can be viewed and dialled.
(Topaz Display Phones Only)
(Find desired number)
(On-Hook)
CALL
LND
Common/Personal Abbreviated Dialling Bins are numbered as follows (by default):
2-digit dialling: Common = 00-79, Personal = 80-99, or
3-digit dialling: Common = 000-899, Personal = 990-919.
System programming is required to provide Group Abbreviated Dialling. Ask your NEC Authorised
Supplier for details.
Using Abbreviated Dialling <Outside Calls>
CALL
Common/Personal
Abbv. Bin No.
DC
Common
/Personal
Abbv.
?
?
?
Group Abbv. Bin No.
Group
Abbv.
CALL
1
8
4
Group Abbv. Key
(SC.851+28)
?
?
?
The Telephone / Extension Number shall be pre-registered to a One-Touch / DSS Key (refer to Page 2).
Trunk Access Code (Dial “0”) should be added as the first digit of the Telephone Number.
Using One-Touch Keys <Outside/Intercom Calls>
One-Touch / DSS Key
Setting Camp On / Callback / Trunk Queuing
<Camp On>
For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
<Callback>
For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
Set / Answer a Message Waiting
When you set a MW, the called party’s MW Indicator starts to flash, and your MW Indicator is lit Red.
When you answer a MW, the MW Indicator will automatically go off when the called party answers.
Hear Intercom
Busy Tone or
No Answer
Set
8
1
4
MW Key
(SC.851+38)
Your phone’s
Indicator is
flashing in Red
Answer
8
1
4
MW Key
(SC.851+38)
Camp On Key
0
Wait without
hanging up
Wait for the
system to call
you back
<Camp On>
<Callback>
(SC.851+35)
[Lit Red when set]
(Hear Busy Tone,
No Answer, or
Trunk Unavailable)
When Camp On set
8
0
7
Cancelling Camp On / Callback / Trunk Queuing
(SC.851+35)
Camp On Key
Or press the
Camp On Key
