Connect the External Paging Amplifier
16
Xn120 Getting Started Guide
7- Connecting the Xn120 to an External Paging System.
The external paging system is connected to the RJ11 socket labelled MOH/PAGE located under the sub cover
to the right of the ST1-ST8 sockets.
An RJ11 cable is supplied with the system.
The external paging system is not supplied with the Xn120.
The connections of the RJ11 plug supplied with the Xn120:
Xn120
MOH/PAGE
socket
Description Specification
2 black
5 yellow
External
Paging output
Impedance: 600 Ohm @1KHz
Nominal output level: 250mV (-10dBm)
Maximum output level: 400mV RMS
!
The connections are not polarity sensitive.