background image

Xn120 System 

 

Xn120 Getting Started Guide 

 

 

     3 

What is the Xn120? 

 
The Xn120 system consists of a main unit with 
a base board pre-installed. 
The Xn120 telephone system will allow the 
connection of up to three exchange lines plus 
eight telephones. The eight telephones can be 
either Xn120 system telephones or normal 
telephones. 
The Xn120 can have an external music source 
connected that can be played to callers placed 
on hold. 
There is also a connection for an external 
paging system.

 

 

It can also accommodate optional parts to 
expand the system or connect ISDN BRI lines.  
Further more, there are optional expansion 
units available to increase the number of exchange lines and telephones that can be connected. Separate 
guides are supplied with the optional equipment. 
 
All equipment will operate when the Xn120 is installed as shown in this guide, it is not necessary to make any 
changes to the system configuration. 
With the default settings: 

· 

Each telephone will function and is assigned an extension number. 

· 

Calls received on the exchange lines will ring at telephone number 200.  

· 

Each telephone can make outside calls by dialing 9. 

· 

Each exchange line is presented at a Function Key with busy lamp indication. 

 
 

Outside lines 

You can connect up to three analogue exchanges lines to the Xn120.  

· 

The exchange lines must be loop start type.  

· 

The Xn120 will also detect Caller ID sent by the Network Provider. The Caller ID must be the ring alert type 
with FSK signaling. 

· 

Each line is connected via an RJ11 6/4 way socket. Three cables are supplied with the Xn120 to connect to 
the exchange lines supplied by your Network Provider. 

 

Summary of Contents for XN120 Vision




























































Reviews: