|
Setting/Setting Confirmation
163
5.6.13.
Factory Default
Setting values can be returned to its initial state through the Web setting.
1.
Open [TOP]-[Maintenance]-[Maintenance]-[Factory Default].
2.
Click the “Initialization” button.
3. Click the “OK” button in the popup message window.
4. This product restarts automatically.
[Note]
Activation contents do not return to its initial state. Therefore, activation does not need to be done again.
The signature returns to its initial state.
The security log, statistical information, and event logs are deleted.
The setting value can also be initialized by pressing the device switch. The initialized content is the same as the
initialization operation at Web setting. Refer to Section 5.10.1 for the initialization using the switch.
17
Setting values are not initialized when the "Cancel" button is clicked.
