|
Setting/Setting Confirmation
189
Setting Item
Value
Remarks
Initial Value
Select Wireless LAN
profile
•
Primary SSID
•
Secondary SSID
Wireless LAN
Access Point Setting
(parent device)
Access point setting
Wireless
Function
•
Checked: when wireless LAN
function is used.
•
Unchecked: when wireless LAN
function is not used.
Both primary and
secondary are
disabled
Network Name
(SSID)
Set SSID.
Character string may contain
alphanumeric characters,
_(underscore), and -
(hyphen). Up to 32
characters can be used.
Primary: sa3500-
XXXXXX-g
Secondary: sa3500-
XXXXXX-gw XXXXXX
Enter a different
value for each device
Dual Channel
Function
•
Enable
•
Disable
This is a function where twice
the transmission rate
(specification 300Mbps or
less) is achieved by extending
the width of the
communication channel used
by the wireless LAN
communication from 20MHz
to 40MHz.
Enabled
(It can only be set on
the primary)
Used Channel
•
Auto: An empty channel between
1~11 is chosen automatically
•
1~13: When a fixed channel is
set.
Auto
(It can only be set on
the primary)
Network
Isolation
Function
* Not available in
bridge mode
•
Check when this function is to be
used.
•
Unchecked when this function is
not to be used.
Refer to Section 3.7.1 for the
network isolation.
Both primary and
secondary are
disabled
Encryption
Encryption mode Choose the encryption mode to be
used.
•
No Encryption
•
WPA-PSK(TKIP)
•
WPA-PSK(AES)
•
WPA2-PSK(TKIP)
•
WPA2-PSK(AES)
•
WPA/WPA2-PSK(TKIP)
When the encryption mode is
set to TKIP or EAP, the WPS
function is disabled.
Both primary and
secondary are
WPA/WPA2-PSK(AES)
