288
Setting/Setting Confirmation
|
WLAN(Secondary)
Enter a name to identify the secondary SSID. It can be set within 0 to 32
characters.
Not Set
WAN
Enter a name to identify the WAN port. It can be set within 0 to 32
characters.
Not Set
■
Device map display setting (IP mode)
1. Click [Setting] tab in [TOP]-[Configuration Management]-[Device Map].
2. Select the update interval from the pull-down menu.
3. Enter comments for each interface. Maximum of 32 characters.
4. Set the community name. Maximum of 32 characters.
5. Click the [Apply] button.
6. Click the [Save] button to save the setting.
Setting Item
Description
Initial
Value
Update Interval
Sets the background update interval for the device information to display
in the pull-down.
Select from 1 hour, 4 hours, 8 hours, 12 hours, 24 hours, no update.
1 hour
Interface Comment
A comment can be added to each physical interface.
LAN1
Enter a name to identify LAN port 1. It can be set within 0 to 32
characters.
Not set
LAN2
Enter a name to identify LAN port 2. It can be set within 0 to 32
characters.
Not set
LAN3
Enter a name to identify LAN port 3. It can be set within 0 to 32
characters.
Not set
LAN4
Enter a name to identify LAN port 4. It can be set within 0 to 32
characters.
Not set
