80
Function Specification
|
3.4.2.
Initialization of Setting Values
[Items to initialize]
Initializing this product will return the following into their default factory settings.
Information set at Web setting (Login password at Web setting is included).
Updated signature during operation (list of dangerous websites, etc.).
Log message and statistical information of security/scan function.
*Since activation contents are not initialized, activation is not necessary.
*The root certificate in this product will be reissued. Note that it differs from the root certificate before initialization.
[Initialization method]
The following are the methods for initialization.
Web setting (Refer to Section 5.6.13 for the operating procedures).
RESET switch (Refer to Section 5.10.1 for the operating procedures).
[Note]
If necessary, initialize after saving the following information to a computer.
Setting values set at Web setting.
Log message, statistical information and event log of the security/scanning function.
Refer to Section 3.4.3 for the procedure to save.
Switch between bridge mode and router mode (refer to Section 5.6.17 or 5.7.28)
Firmware version down (see Section 5.6.14)
Switching between MAC mode and IP mode (see Section 5.9.3)
If the simple RADIUS function is used and the root certificate is imported to a PC, re-import the newly generated root
certificate.
After initialization, accessing the Web setting will display the wizard, so set the operation mode again.
[Caution]
When this product is initialized with the connected USB storage device where the setting values are saved, the setting
values are restored from the USB storage after restarting this product. Remove the USB storage before initializing this
product.
