|
Function Specification
85
3.4.11.
Event Log
The event log is a function to display the setting change log and the communication log of this product. Necessary
information for troubleshooting can be gathered during maintenance. Event log can be saved on a computer. For the
details, refer to Section 6.1.10.
[Contents of event log]
Event occurrence date and time
Function name that detected the event
Event content
[Event log saving]
Regularly save the log file in the memory
The maximum size of the log file storage is 200 Mbytes.
If the log storage is exceeded, the old log is deleted and the new log is saved.
While saving the log file, the POWER lamp blinks orange, do not turn off the power.
In addition to the above, save the event log file to the memory during restart of the device by Web setting operation.
*In case of power failure, event log files not saved in memory will be lost.
[Web setting operation]
1,000 event logs from the latest can be checked on the Web setting.
The level to display the event log and the level to save can be set.
Click the "clear" button to delete the event log. It also deletes the log file saved in memory.
[Note]
When initialization is performed, the log file saved in memory will be deleted.
