26
7. Slowly press down the foot control or long
press the start/stop button to start sewing.
Release the foot control or press the start/
stop button again to stop the machine.
Note
You can use reverse sewing for back
tacking and reinforcing seams by pressing
the reverse sewing lever. Please refer to
"Useful skills" chapter for more information.
8.
Turn the handwheel toward you (counter-
clockwise) to raise the needle. Raise the
presser foot lifter and remove the fabric.
9. Guide both threads to the side of the face
plate and into the thread cutter. Pull the
threads down to cut them.
①
Thread cutter
1
Summary of Contents for NC-59QD
