38
Button sewing
Buttons can be sewn on with the sewing machine. Buttons with 2 or 4 holes can be
attached.
Move the drop feed lever to lower the feed
dogs.
①
Lowered position
Put the work under the foot and place the
button in desired position, then lower the foot.
Select the straight stitch and sew a few
securing stitches.
Select the zig-zag stitch and adjust the stitch
width according to the distance between the
two holes of the button.
Turn the handwheel to check that the needle
goes cleanly into the left and right holes of the
button.
Slowly sew on the button with about 10
stitches. Select the straight stitch and sew a
few securing stitches.
For buttons with 4 holes, sew through the
front two holes first, push work forward and
then sew through the back two holes.
When you finish the work, move the drop feed
lever to raise the feed dogs.
①
Raised position
Using the button sewing foot.
1
1
Summary of Contents for NC-59QD
