background image

 

- 1 -

 

 

 
 

 

Warning against injuries 
and material damages: 

 

According to legislation, you as the user of an 
electrical appliance are responsible for preventing 
possible accidents through safety-conscious 
behaviour: 
 
• Keep your work space tidy. An untidy workplace 

can lead to accidents.   

 
• Provide adequate lighting when working!   
 
• Do not wear loose clothing or jewellery,as these 

can be caught in the moving parts. You should 
also wear a hair net if you have long hair. 

 
• Avoid abnormal posture. Remain steady and in 

a well-balanced position at all times.   

 
• Be alert! Pay attention to what you are doing. 

Always take a rational approach to your work. 
Never work with the sewing machine if you are 
unable to concentrate or if you are feeling 
unwell!  

 
If accidents occur as a result of handling the 
machine with insufficient care, or failure to follow 
the safety instructions in this manual, then the 
manufacturer cannot accept liability. 
 

Please use for your sewing machine the 
ZHEJIANG FOUNDER presser foot, type 
KD-2902. 

Power rating:    220 - 240V ~ , 50Hz 
Current rating: 1.0A 
Protection Class :  II

 

 
The sound pressure level under normal operating 
conditions is 78dB (A). 
 
If the supply cord that fixed with foot controller is 
damaged, it must be replaced by the 
manufacturer or its service agent or a similar 
qualified person in order to avoid a hazard. 
 
Do not dispose of electrical appliances as 
unsorted municipal waste, use separate collection 
facilities.  
Contact your local government for information 
regarding the collection systems available. 
If electrical appliances are disposed of in landfills 
or dumps, hazardous substances can leak into 
the groundwater and get into the food chain, 
damaging health and well-being. 
 
 

Safety instructions 

 

Like any other electrical device, a sewing machine 
can cause serious, even life-threatening injuries.To 
avoid this, and in order to work safely: 
 
• Before initial use of your sewing machine, read 

these operating instructions thoroughly.   

 
• Keep the operating instructions in a suitable place 

near the machine. When passing the appliance on 
to others, always enclose the operating instructions.

 
• Always disconnect the power supply when leaving 

the machine unattended. This will prevent the risk 
of accidents if the machine is switched on 
accidentally. 

 
• First pull the power plug before changing the bulb or 

performing maintenance work on the machine.   

This will prevent possibly life-threatening electric 
shocks.  

 
• Do not remove the plug from the socket by pulling 

on the cable. Always grip the plug and not the cable 
when pulling out the power plug. 

 
• Only use the sewing machine in dry rooms. 

  Don’t use the machine in wet condition and 

location. 

 
• In case of any visible damage on the machine, the 

foot switch or the power cable: Have the damage 
repaired by Customer Service before using the 
sewing machine again. 

 
• Never let children or elderly persons handle the 

machine unsupervised because they may not 
properly appreciate the possible dangers. Keep 
electrical appliances outside the reach of children. 

 
• Never use the machine when the ventilation 

apertures are blocked. Keep the ventilation 
apertures of the machine and the foot switch free 
from fluff, dust and waste material. 

 
• Don't let children play with the sewing machine. 
 
• Never use the machine if the air vent is blocked. 

Keep the air vent free from dust and fluff.

 

 
• Never place anything on the foot controller. 
 
• This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use of the 
appliance by a person responsible for their safety. 

 
• Children should be supervised to ensure that they 

do not play with the appliance. 

 

Summary of Contents for Vigorelli S1







































Reviews: