57 (E)
- Model N424E ONLY -
NARROW HEMMING
No. 1 Straight Stitch (Center Needle
Position)
Narrow Hemming Foot
1. Fold edge of fabric over about 3 mm (1/8
inch), then fold it over again 3 mm for
about 5 cm (2 inches) along edge of
fabric.
2. Insert needle into the fold by rotating the
hand wheel toward you, and lower the
presser foot. Sew several stitches and
raise the presser foot.
Insert fabric fold into spiral opening of
hemmer foot. Move fabric back and forth
until the fold forms a scrolled shape.
3. Lower the presser foot and start sewing
slowly with guiding raw edge of fabric in
front of hemmer evenly into scroll.
3 mm
5 cm
- Model N424E ONLY -
CORDING
No. 11 Zigzag Stitch for Single Cording
No. 13 Multi Zigzag for Triple Cording
Cording Foot
A. SINGLE CORDING
1. Set stitch pattern to No. 11. Insert the
cord in the center groove of cording foot
from the right side opening. Pull cord
about 5 cm (2 inches) behind the foot.
2. Adjust the stitch width so that the stitches
are just cover the cord. Lower the foot and
sew slowly, guiding the cord.
B. TRIPLE CORDING
Set the stitch pattern to No. 13 and set the
stitch width to 6.0-7.0.
Insert three cords into the slots of cording
foot.
57 (E)
