59 (E)
ADJUSTING THE
FORWARD AND REVERSE
STITCHES
Depending on the type of fabric you sew, it
may be necessary to adjust the forward and
reverse stitches.
This adjusment is needed when the
decorative or the letter stitch pattern is
misformed.
Turn screw which is located bottom of the
machine in either direction as may be
required.
DECORATIVE STITCH PATTERN
1. If patterns are misformed as illustration
(A), turn screw in direction of symbol (+).
2. If patterns are misformed as illustration
(B), turn screw in direction of symbol (–).
- Model N424E, N422E ONLY -
LETTER STITCH PATTERN
1. If patterns are misformed as illustration
(C), turn screw in direction of symbol (+).
2. If patterns are misformed as illustration
(D), turn screw in direction of symbol (–).
A
B
C
D
- Model N424E, N420E ONLY -
N424E 25
N420E 22
EYELET
This stitch pattern is used for making belt
holes and other similar applications.
N424E N420E
25
22 Eyelet
Satin Foot (B)
You can choose the 3 sizes of eyelet by
changing the stitch length.
1. Place the fabric under the presser foot
and lower it. Start the machine.
Machine will sew the eyelet and stop
automatically.
2. Raise the presser foot and cut the
threads.
3. Make a hole in the center of the eyelet.
Note
Eyelet punch is not provided with this
machine.
