14 (I)
- Mod. N422E -
SELEZIONE DI UN PUNTO
UTILE
La macchina è dotata di 42 punti utili.
(vd. pag. 63 o la TABELLA PUNTI sotto il
coperchio superiore)
Quando accendete la macchina il punto
diritto viene selezionato e indicato sullo
schermo LCD.
A. CONTRASTO SCHERMO LCD
Il contrasto dello schermo si regola ruotando
il selettore controllo contrasto LCD.
B. TASTI PUNTO DIRITTO E ZIGZAG
Potete selezionare i punti diritto o zigzag
direttamente premendo i tasti punto diritto o
punto zigzag.
C. PER SELEZIONARE UN PUNTO UTILE
1. Premete il tasto Punto utile.
Appariranno sullo schermo i primi 6 punti
utili.
2. Premendo il tasto Più (+>>) o Meno (<<-)
scorreranno avanti o indietro 6 punti.
Premete questi tasti finchè appare il punto
desiderato.
3. Premete il tasto Cursore (>) o (<) per
evidenziare il punto desiderato.
Nota:
Quando viene evidenziato il punto più
laterale, premendo il tasto Cursore (>) o
(<) appariranno i successivi o i precedenti
6 punti di quel gruppo.
4. Premete il tasto OK.
Lo schermo LCD indica le informazioni
relative al punto selezionato (vd. pagina
successiva).
Per selezionare punti decorativi o caratteri
vd. pag. 51 [CUCITURA PUNTI
DECORATIVI E CARATTERI].