16 (E)
- Model N420E -
TO SELECT A PATTERN
This sewing machine can sew 100 stitch patterns and they are indicated in the pettern chart
located inside of the top cover.
Each stitch pattern is numbered from “00” to “99”.
When you turn on the machine, “01” will appear on the display indicating that the straight
stitch ( center needle position ) is selected.
1. STITCH NUMBER INDICATOR
This indicator indicates three stitch mode.
A. Pattern Number
B. Stitch Length
C. Stitch Width
These modes are changed by pressing the
each mode button (A-C).
The indicator light (a-c) of selected mode will
turn on.
When you change the stitch pattern number,
the stitch length and width will be re-set to
pre-set length and width.
Therefore, you should select the pattern
number first, and next, adjust the length and
width.
2. TO SELECT STRAIGHT STITCH,
ZIGZAG STITCH AND BUTTONHOLE
Whenever you can select straight stitch,
zigzag stitch or keyhole buttonhole directly
by pressing the each button.
A
B
C
a
b
c
3. TO SELECT OTHER STITCH PATTERN
1. Press the Pattern Number Mode Button.
Indicator light will turn on and pattern
number will appear on the display.
(If this mode has been selected already, it
is need not to press this button.)
2. Select the pattern number you want to
sew by pressing the up-down buttons.
Use jump button to jump pattern number.
(See next page)
You cannot change the pattern number
while sewing.