3
© by NECTA VENDING SOLUTIONS SpA
0401 171 - 02
The vending machine is suitable for dispensing food
that is hermetically sealed and kept refrigerated.
Strictly comply with the producer’s specifications
regarding storage temperature and expiry date for
each product.
Any other use is unsuitable and thus potentially dan-
gerous.
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installa-
tion. It must be positioned in a dry room where the tempera-
ture remains between 5°C and 32°C, and not where water
jets are used for cleaning (e.g. in large kitchens, etc.).
To ensure correct machine operation we recommend
installing the air baffle plate / spacer to the back of the
machine.
Screw the 2 quick-snap pins, supplied with the machine, to
the rear feet and insert the clips into the holes provided on
the spacer.
Insert the baffle plate’s tangs into the special slots and click
on the clips.
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of
the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such a system is responsible for any
damage to the machine or to things and persons caused
by faulty installation.
The integrity of the machine and compliance with
the standards of the relevant systems must be
checked at least once a year by qualified personnel.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the ma-
chine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch off the machine lighting during periods of
inactivity, thus achieving considerable energy sav-
ings;
- keep the machine away from heat sources;
- regularly check the condition of the door seal to limit
any heat dispersion;
- limit as much as possible door opening time during
loading operations to avoid temperature increase
inside the cabinet and subsequent power consump-
tion.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in
force regarding environment protection should be strictly
observed. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials and the gas inside the cooling
unit (see the data plate), should be recovered by
qualified companies by means of special equipment.
Fig. 1
1 - Quick-snap pins
2 - Clips
3 - Air baffle plate / spacer
4 - Tangs
The machine should be positioned with a maximum incli-
nation of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included.
A front foot panel is available as accessory.
Summary of Contents for StarFood
