17
© by NECTA VENDING SOLUTIONS SpA
03-2003 217 00
RESETTING THE FAILURE STATISTICS
Press button “ ” when the display indicates the “Reset
statistics“ function, then the message “Confirm?” will be
start blinking.
Press the confirm button “ ”, the message “Working” is
displayed for a few seconds and all statistics regarding
failure counters are reset.
GENERAL COUNTER
The machine stores all selections in this counter, which
cannot be reset.
This function allows reading or displaying of the counter
when the machine is switched started.
Press button “ ” when the display indicates the “General
counter” function and the function status (ON/OFF) will be
displayed; press button “ ”, the status will start blinking
and then can be changed with the “ ”and “ ” buttons.
Press button “ ” again and the stored value will be dis-
played for 3 seconds.
CHANGE TUBES CONTROL
By accessing the “Tube control” function the change tubes
can be filled
or released manually. Confirm refilling, and the display will
indicate “Credit: ——”; insert the desired coin into the
selector and the display will indicate the value of the money
inserted.
The tubes can be emptied directly by pressing the selec-
tion buttons “1, 2, 3 and 4”.
Press button “8” to exit the function.
PROGRAMMING
When the programming button located on the internal side
of the push-button board (see Fig. 19) is pressed twice the
machine will be set to “Programming” mode.
The message “Programming” is displayed for approx. 2
seconds, and then the first option of the programming
menu is displayed to activate the following functions:
“Present failures”
current failure reading
“Water dose”
water dose setting
“Powder dose”
powder dose setting
“Set Prices”
price setting
“Set Prices/button”
prices/button combination
enables/disables button
“Basic coin / DP”
setting the basic coin value and
position of the decimal point
“Payment systems”
Validator
Totalizer
MDB
“Initialise”
RAM initialising
“Machine code”
setting the machine
identification code
“Machine Config.”
setting the machine configuration
“Selec. counter”
setting the number of selections
after which the machine will lock
“Prom. message”
enabling and setting the promo-
tional message
“Language”
setting the language used to
indicate messages on the
display
“Whipping time”
instant drinks whipping time
“Password”
enabling password to access
programming
“Selec. configuration” definition of accessories to be
dispensed with each single
button
“Discount data”
price change for using a
ceramic cup
“Special sales”
Free Vend and Jug Facilities
1 - Release tube “A”
2 - Release tube “B”
3 - Release tube “C”
4 - Release tube “D”
5 -
6 -
7 -
8 - Exit function
Summary of Contents for Colibri
