Instructions
for Installer,
Maintenance Engineer
and final User
SINFONIA
Rev. 00
H4345 - 00
02/2013
Page 27 of 41
7 MAINTENANCE
The following section is a basic guide for general maintenance and cleaning of the vendor.
7.1 Access to Maintenance Area
Access to the internal part of the vendor
(maintenance area
) is possible using the pecially provideds key
supplied with the Vending machine.
FIG. 6.1 – ACCESS KEY
7.2 Preventive Maintenance
In order to guarantee a good performance of the Vendor the following maintenance operations are
recommended:
•
Check the vending machine and its surroundings area, check for signs of rust on the cabinet and
obstructions of air vents
•
Open the door and check the absence of water accumulation, signs of rust, and moisture around
the edges of the door
•
Check the evaporator drain for obstructions (water in the evaporator area must drain towards the
condenser pan)
•
Periodically check the door seals. If damaged replace immediately
•
Periodically check that the condenser is clean
•
Check that the evaportor fans and the cooling unit run normally (the blades must be free from any
obstruction)
•
Check that the compressor and the condenser fans run normally ( the blades must be free from
any obstruction)
•
Check that all the selections are correctly delivered.