![background image](http://html1.mh-extra.com/html/necta/sinfonia-gf6/sinfonia-gf6_user-and-maintenance-manual_3834900029.webp)
Instructions
for Installer,
Maintenance Engineer
and final User
SINFONIA
Rev. 00
H4345 - 00
02/2013
Page 29 of 41
7.4 Led Tube Replacement
To replace a LED tube, work as follow:
•
Open the door.
•
Turn off the machine pressing the main switch.
•
Take out the LED-tube from the fastening clips.
•
Disconnect the LED-tube from is wiring.
•
Wire up the new LED-tube and fasten it with the clip.
After replacement, work as follows:
•
Turn on the machine pressing the main switch.
•
Close the door.
NOTE: with the door open, the LED’s turn off automatically!
Q.TY 1 LED TUBE 981mm
LH SIDE INSIDE CELL
WITH THE VENDOR DOOR OPEN ,
THE LEDS CLOSE AUTOMATICALLY
Q.TY 2 LED TUBE 501mm
RH SIDE INSIDE CELL