20
© by NECTA VENDING SOLUTIONS SpA
0407 239 - 00
ROTATION SELECTIONS
With this function it is possible to create 7 groups of spirals
with the same selection number that are activated by
rotation, to increase the autonomy of the same product
and make dispensing uniform.
The grouped spirals of a single selection must be next to
each other.
All selections belonging to the same group must have the
same price.
For correct safety management of the selections it is
advisable that also a dispensing detection device be
installed in the machine.
PRODUCT CODE
This function is used for assigning a 4-digit identification
code to each selection for processing the statistics.
DIRECT SELECTIONS
The vending machine can be fitted (as standard feature or
as optional according to the model) with a 5-button keypad
to which allocate a group of selection.
After enabling the direct selection function,
it will be possible to allocate a group of selections to each
key by specifying the start and end numbers of the series.
The selections, as long as in a sequence, can be also from
different trays. The products are dispensed alternating
from each of the spirals that are grouped in a direct
selection.
All selections belonging to the same group must have the
same price.
For correct safety management of the selections it is
advisable that also a dispensing detection device be
installed in the machine.
PHOTOCELL PARAMETERS
The vending machine can be fitted (as standard feature or
as optional according to the model) with a device that, by
means of photocells, detects the passage of dispensed
products.
When this device is installed, the following can be moni-
tored:
- Error before dispensing; when at the selection start the
photocell beam is not read.
- Error after dispensing; when the motor fails during
dispensing.
- Error for no product; when the device does not detect
the passage of a product during dispensing.
In these cases the machine can be programmed to:
- set a rotation time for each spiral for settling beyond
the normal rotation;
- return or not the paid amount;
- block further selections for the involved spiral.
DISPENSING COMPARTMENT LOCK PARAMETERS
The dispensing compartment can be fitted (as standard
feature or as optional according to the model) with a lock
device.
This function is used for deciding whether leaving the
dispensing compartment “always free” or “unlock it with
dispensing”.
In “unlock with dispensing” mode the dispensing compart-
ment hatch is unlocked only for a certain period of time,
programmable at between 1 and 10 minutes, after each
product selection. In this case it is possible to enable the
function that places the vending machine out of service for
a certain period of time, programmable at between 1 and
10 minutes, if the dispensing compartment hatch stays
open.
The machine is placed out of service if the lock device is
always closed during dispensing.
REFRIGERATION PARAMETERS
The operation of the refrigeration system can be pro-
grammed for the following functions.
TEMPERATURE
The machine internal temperature during normal opera-
tion can be set directly in °C (5° to 20°C, 8°C by default).
The temperature differential deviation defined with the
previous function for starting/stopping the cooling unit is
2°C.
DEFROSTING
This function allows for a defrosting cycle (switching the
cooling unit off, regardless of the temperature) of 20
minutes. The time interval between cycles can be pro-
grammed from 0 to 99 hours (set to 6 hours by default); the
time interval will be determined according to the relative
humidity and the frequency of door openings.
With the timing set to 0 the function is disabled.
ENABLE COLD UNIT
The cooling unit operation can be disabled. The change
will apply when restarting the machine.
FOOD CONTROL
This function is not active in this model.
TEMPERATURE LOG
The internal temperature is stored every 10 minutes.
With this function, it is possible to read the date, time and
stored temperature.
Summary of Contents for Snakky
