3
© by NECTA VENDING SOLUTIONS SpA
0407 239 - 00
USING THE VENDING MACHINE FOR
PACKAGED PRODUCTS
A different sale price can be set for each product selection
by the machine electronic control. The various functions
are programmed through the selection keypad without any
need for additional equipment.
All models are equipped with variable configuration trays,
adding or removing dividers, spirals and ratiomotors; there-
fore the machine can be easily suited to specific needs.
All trays are preset for the operation of up to 6 selections
(maximum setting).
The product compartments are equipped with independ-
ent motors and spirals; each selection will continue its
operation autonomously even if the other selections are
disconnected.
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installa-
tion. It must be positioned in a dry room where the tempera-
ture remains between 5°C and 32°C, and not where water
jets are used for cleaning (e.g. in large kitchens, etc.).
To ensure correct machine operation we recommend
installing the air baffle plate / spacer (80 mm) to the back
of the machine (see Fig. 2).
Warning!
Incorrect ventilation may compromise the proper func-
tioning of the cooling unit.
The machine should be positioned with a maximum incli-
nation of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included.
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of
the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such a system is responsible for any
damage to the machine or to things and persons caused
by faulty installation.
The integrity of the machine and compliance with the
standards of the relevant systems must be checked at
least once a year by qualified personnel.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- keep the machine away from heat sources;
- regularly check the condition of the door seal to limit
any heat dispersion;
- limit as much as possible door opening time during
loading operations to avoid temperature increase
inside the cabinet and subsequent power consumption.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies;
- the gas inside the cooling unit, regardless of the type
(see the identification plate), should be recovered by
qualified companies by means of special equipment.
Fig. 2
1 - Securing holes
2 - Spacer
3 - Fastening screws
Summary of Contents for Snakky
