8
© by NECTA VENDING SOLUTIONS SpA
0110 171-01
ROUTINE MAINTENANCE
Before carrying out any cleaning or maintenance opera-
tions, disconnect the machine from the mains power
supply.
Under no circumstances should sprayed water be
used to wash the machine.
PERIODICAL CLEANING
Clean metal parts with lukewarm soapy water, then rinse
thoroughly and wipe dry carefully.
When cleaning metal parts do not use detergents
containing abrasive or corrosive agents; do not use
common steel wool, wire brushes or steel scrapers.
Clean varnished parts with silicone wax.
Switch off the machine in the event of failure or
malfunction. Any repairs should be carried out exclu-
sively by qualified personnel using original spare
parts only.
SUSPENDING FROM USE
For long periods of inactivity the following recommenda-
tions should be observed:
- disconnect the plug from the power outlet;
- remove all products from the drums and clean the
inside and all accessories;
- using a cloth lightly damp with Vaseline oil, apply a
protective film on all metal surfaces.
Summary of Contents for StarFood
