19
© by NECTA VENDING SOLUTIONS SpA
0110 171-01
RESET
Statistics can be reset either globally (all types of data) or
partially for:
Total
- selections
- failures
- coin mechanism data
Relative
- selections
- failures
- coin mechanism data
Press the confirm button “ ”, and the message “Confirm?”
starts blinking.
Press the confirm button “ ”, the message “Working” is
displayed for a few seconds and all statistics are reset.
TEST
DRUM TEST
With this function the correct functioning of the drum
rotation can be tested by pressing the loading buttons.
With these functions, pressing the loading buttons does
not change the status of a drum and/or of a sector (full/
empty/expired).
SLIDER TEST
With this function the correct functioning of the sliders can
be tested by pressing the loading buttons without rotating
the drums.
With these functions, pressing the loading buttons does
not change the status of a drum and/or of a sector (full/
empty/expired).
COMPLETE SELECTIONS
Normal product dispensing can be simulated without
inserting any money.
With this function, when pressing the selection button the
status of a drum and/or of a sector is changed (full/
empty/expired).
MISCELLANEOUS
This menu contains some sub-menus, used less fre-
quently, which permit control of the functions described
below.
MACHINE INFORMATION
The machine can memorize a series of codes which will
identify it when retrieving statistics.
More specifically the following can be stored:
- The 6-digit operator code which also represents the
password to access code change mode;
- 8-digit vending machine code which identifies the
machine.
INSTALLATION DATE
This function is used to store the current date of system as
installation date.
The date is printed when retrieving the statistics.
MACHINE CODE
When the “Machine code” function is displayed the eight-
digit numeric code identifying the machine can be changed
(from the default 0).
OPERATOR CODE
When the “Operator code” function is displayed the six-
digit numeric code identifying groups of machines can be
changed (from the default 0).
INITIALISING
When the “Initialise” function is displayed the vending
machine can be initialized restoring all default data.
This function should be used if there is a memory data
error or when the EPROM is replaced.
All statistic information will be reset.
Press confirm button “ ” to display the message “Con-
firm?”. Press confirm button “ ” a second time and the
message “Working” is displayed for a few seconds.
Summary of Contents for StarFood
