5
© by NECTA VENDING SOLUTIONS SpA
0110 171-01
LOADING AND CLEANING
VENDING SYSTEMS
- Shopper: by pressing the rotation button #, the desired
product can be brought to dispensing position (on the
right hand side of the slider window).
- First in/First out: the product is brought to dispensing
position (First out) with the same sequence of loading
(First in).
The product availability is checked by counting the
number of selections made in relation to the number of
sectors.
It is however possible to have a combination of the two
systems in any desired sequence.
The following options are also possible with a suitable type
of coin mechanism:
- Single vend: The change is returned automatically at
the end of the selection procedure.
- Multivend: After the selection procedure, the credit is
available for other selections until it is claimed through
the coin return button.
- With purchase obligation: At least one selection
must be made to be able to recover the money in-
serted.
- Without purchase obligation: The money inserted
can be recovered at any time through the coin return
button.
DISPENSING CYCLE
When keeping the rotation button # pressed the drums
programmed for “shopper” mode start rotating. When
releasing button # the drum rotation is stopped and the
desired product is brought to dispensing position (on the
right hand side of the slider window).
The drums which are programmed for First in/First out
mode, or that are empty, do not rotate.
Each single drum has its own selection button; if there is
sufficient credit, when pressing the button corresponding
to the desired drum, the slider opens automatically to allow
the product to be picked up.
After a programmable time (10 seconds by default) the
slider closes and the empty sector moves to the right.
During the closing phase the slider can be reopened,
within 10 seconds, by pressing any button
N.B.
Should the slider be obstructed during the closing phase,
four consecutive closing attempts will be made before
disabling the machine.
For the following 10 minutes the closing attempts will be
repeated every minute, then the machine will lock.
The closing attempts are indicated by a sound and on the
display.
CONTROLS AND INFORMATION
The user controls and information are on the outside of the
door.
The credit and all function messages are indicated on the
display.
Button # is used to rotate the drums which are programmed
for “shopper” dispensing.
Fig. 3
1
Lock for refrigerated box
2
Price indicator display
3
Product labels
4
Space for payment system installation
5
Selection buttons
6
Liquid crystal display
7
Coin slot / return button
8
Drum rotation button
9
Lock for payment system door
10
Space for user information
11
Coin return flap
Summary of Contents for StarFood
