12
FIREBRICKS
The firebricks are designed to fit in the base and along the rear and side walls of
the firebox. Please ensure the bricks are fitted before using the fire.
LIGHTING YOUR FIRE
1) Place firelighters and pieces of crumpled newspaper in firebox floor.
2) Cover the paper with small diameter split kindling.
3) Place 3 - 4 small pieces of firewood on top of the kindling.
4) Open air slide fully.
5) Light several parts of the newspapers.
6) Close the door to avoid smoke spillage. Do not close latch, this will allow
extra air into the firebox and helps create a draft.
After approximately 10 minutes:
7) Once firewood is fully ignited,
CLOSE DOOR FULLY.
INITIAL OPERATION PERIOD
Operate your first few fires with the fan on high to allow the high temperature
paint to cure.
NOTE:
For the first few fires the high temperature paint curing may cause an
odour. Ensure sufficient ventilation is supplied to allow dissipation of any smoke
and odour.
THIS ODOUR IS NORMAL
Summary of Contents for FS 800
Page 10: ...10 ...
