NED
UME-0021-03 SU2020/SU2025
55
8.6.6 Calibration
a)
”Calib Black”: Acquisition of black data (When you do this
please cover the lens.)
b)
”Calib White”: Acquisition of white data.
c)
“Data reflect”: Save the calibration data to camera memory and apply the data.
d)
“Level”: Enter the value directly in the edit-box or click the spin-button to set the value.
Then, click the
“Send” button to send the command to the camera.
e)
“Mode”: Every time you choose from the Drop-down-list-box, the command is sent to the
camera.
8.6.7 Level Correction
a)
“Minimum”: Enter the value directly in the edit-box or click the spin-button to set the value.
Then, click the
“Send” button to send the command to the camera.
b)
“Maximum”: Enter the value directly in the edit-box or click the spin-button to set the value.
Then, click the
“Send” button to send the command to the camera.
c)
“Enable”: Every time you click the Check box, the command is sent to the camera.
8.6.8 Test Pattern
Every time you choose from the Drop-down-list-box, the command is sent to the camera.
