12 NED
XCM4040SAT4 UME-0002-04
FPN
(Fixed Pattern Noise)
Typically 5DN (without correction, at minimum gain)
2DN (with correction, at minimum gain)
PRNU
(Photo Response
Non Uniformity)
Typically 20DN (without correction, at minimum gain)
4DN (with correction, at minimum gain)
Random Noise
Typically 20DN (peak value at minimum gain)
Video output
Camera Link Medium Configuration (8 or10bit / 4tap)
Control Input
CC1:External Trigger Signal, CC2-4:Not in use
Data/Controller
3M : MDR26[Camera Link] x 2
Connectors
Power Supply
Hirose: HR10A (4Pin)
Maximum Cable Length(m)
*1)
10
Lens Mount
Nikon F Mount
Operating Temperature (
˚
C)
No Condensation
0 to 50
Power Supply Voltage (V)
DC12 to 15 [+/-5%]
Consumption Current (mA)
(typically)
500
Size
W x H x D (mm)
80 x120 x 79.7
Mass (g)
(Camera only)
Approx. 730
Additional Function
1. Shading Correction
2. Gain/Offset/Video Output(8bit/10bit) Adjustable
3. Test Pattern Output
4. Programmable Exposure Control
5. Scan Direction Switching
*1)
Tested under the following conditions.
i Camera Link Cable :14B26-SZLB-A00-0LC by 3M (Full Configuration 10m)
ii Frame Grabber Board : Matrox : SOL 6M FC by Matrox (Solios : Medium Configuration
compatible), or GRAPHIN :IPM-8531CL-M and IPM-8531CL-F
*2) DN : Digital Number (10bit : 0 -1023)
*3) This product is designed and manufactured in accordance with the following
standards.
EN 55011:1998+A1:1999+A2:2002 Group 1 Class A
EN 61000-6-2:2005
FCC Part 15 Subpart B:2006 Class A
*4) Measurements were made at room temperature.
