Nederma 10500133, User Manual

Welding and Grinding table

4 Installation

NOTE! 
For storing the welding gun, see 

Figure 2

 and

the following list.

1

Welding ground clamp.

2

Earth cable.

3

Holder for welding pistol.

The Welding and Grinding table should be located with
consideration for easy handling of the collected dust
and for convenience of service and maintenance, see

Figure 3

.

The Welding and Grinding table is usually installed on
a reinforced concrete foundation. When calculating
for foundation or supporting structure it should be
taken into consideration the total weight of the table
including the collected contamination. The Welding
and Grinding table is to be securely anchored to the
foundation.

Connect the outlet (outlets) to a duct system, see 

Sec-

tion 4.1 Installation example

.

4.1 Installation example

See 

Figure 3

 and the following list.

1

Gables possible to fold for long working objects.

2

Regulating damper.

3

Motor damper.

4

Regulating damper.

5

Motor damper.

6

Fan Inverter.

7

After cleaning damper.

8

Filtermax DF 80.

9

NCF Fan.

10 Dust drawer.
11 Welding and Grinding table, width 1355.
12 Welding and Grinding table, width 2000.

5 Maintenance

WARNING! Risk of personal injury.
Use protective goggles, breathing mask and
gloves when doing service work, specially
when emptying the dust box.

Check the following points at least twice a year or
when necessary.
• Empty the dust box. Do not let it overfill. Disposal of

dust should be in accordance with local regulations.

• Check that the outlet connection not is blocked.

• Check that the outlet connection to the duct or mo-

tor damper is tight and secured.

6 Spare Parts

Table screen, see 

Figure 4

.

CAUTION! Risk of equipment damage
Use only N

$

e

$

d

$

e

$

r

$

m

$

a

$

n

$

 original spare parts and ac-

cessories.

Contact your nearest authorized distributor or
N

$

e

$

d

$

e

$

r

$

m

$

a

$

n

$

 for advice on technical service or

if you require help with spare parts. See also
w

$

w

$

w

$

.

$

n

$

e

$

d

$

e

$

r

$

m

$

a

$

n

$

.

$

c

$

o

$

m

$

.

6.1 Ordering spare parts

When ordering spare parts always state the following:
• The part number and control number (see the

product identification plate).

• Detail number and name of the spare part (see

w

$

w

$

w

$

.

$

n

$

e

$

d

$

e

$

r

$

m

$

a

$

n

$

.

$

c

$

o

$

m

$

/

$

e

$

n

$

/

$

s

$

e

$

r

$

v

$

i

$

c

$

e

$

/

$

s

$

p

$

a

$

r

$

e

$

-

$

p

$

a

$

r

$

t

$

-

$

s

$

e

$

a

$

r

$

c

$

h

$

).

• Quantity of the parts required.

7 Recycling

The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or 

$

N

$

e

$

d

$

e

$

r

$

m

$

a

$

n

$

 if uncertainties arise

when scrapping the product at the end of its service
life.

EN

9