background image

FlexPAK

1 Preface

Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and

developer of products and solutions for the environ-

mental technology sector. Our innovative products

will filter, clean and recycle in the most demanding of

environments. Nederman's products and solutions will

help you improve your productivity, reduce costs and

also reduce the impact on the environment from in-

dustrial processes.
Read all product documentation and the product iden-

tification plate carefully before installation, use, and

service of this product. Replace documentation im-

mediately if lost or damaged. Nederman reserves the

right, without previous notice, to modify and improve

its products including documentation.
This product is designed to meet the requirements

of relevant EC directives. To maintain this status, all

installation, maintenance, and repair is to be done

by qualified personnel using only Nederman original

spare parts and accessories. Contact the nearest au-

thorized distributor or Nederman for advice on tech-

nical service and obtaining spare parts. If there are

any damaged or missing parts when the product is de-

livered, notify the carrier and the local Nederman rep-

resentative immediately.

2 Safety

2.1 Classification of important informa-

tion

This document contains important information that

is presented either as a warning, caution or note, ac-

cording to the following examples:

WARNING! Risk of personal injury

Warnings indicate a potential hazard to the

health and safety of personnel, and how that

hazard may be avoided.

CAUTION! Risk of equipment damage

Cautions indicate a potential hazard to the

product but not to personnel, and how that

hazard may be avoided.

Notes contain other information that is import-

ant for personnel.

2.2 General safety requirements

WARNING! High vacuum

A high vacuum system creates a powerful suc-

tion that may cause serious eye injury or hear-

ing impairment. Persons who will be using Flex-

PAK, or may come in contact with FlexPAK, is to

be informed about this risk.

WARNING! Risk of personal injuries

Never look into the exhaust air duct. Debris and

particles coming out of the outlet may cause

eye injuries.

WARNING! Risk of electric shock

Personnel operating FlexPAK need to pay spe-

cial attention to avoiding discharge of static

electricity.

Only authorized personnel are allowed to have

access to this unit.

9

Summary of Contents for FlexPAK
























































Reviews: