Nederman PowerBox, User Manual

PowerBox

9

EN

1 

Preface

To guarantee correct function and minimal repairs, it is important to read and understand the 

information in this instruction manual. The product is designed to meet the requirements of the relevant 

directives. To maintain this status, all installation, repair and maintenance work must be carried out by 

qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised 

dealer for advice on technical service or if you require spare parts.

2 

Safety Instructions

WARNING! 

Risk of personal injury!

The PowerBox is not to be used in an explosive environment. The PowerBox must be mounting 

according to the installation instructions. Never carry out any service work, mechanical or electrical, 

without first disconnecting the power supply and the compressed air supply.

The sliding valves must always be in the closed position when the PowerBox is not in use. If the 

electric sockets are not within 0.6–1.9 m above ground, they are not to be used as power switches. 

3 

Technical data

Table 3-1: Technical data

Operating temperature

0° C – 40° C

Max air pressure

10 Bar

Cable/hose length

11 m

Compressed air, 2 adjustable outputs

¼”

Compressed air, 1 non-adjustable (feed pressure)

¼”

Max load

10 kg

Weight (depending on type)

11–20 kg

Recycling materials

90–98 weight –%

4 

Management

The Power box is a unit with outputs for dust extraction and compressed air, some types also supply 

electricity. The PowerBox is also available with different types of electric sockets.
The Tool holders (pic. 10, A) are mounted on the PowerBox. Max weight load on tool holders is 10 kg.

5 

Installation

The pictures may vary due to different types.

• 

Vacuum (pic. 1):

 Two vacuum outputs (A) female, diameter 38 mm with swivel function. The 

Sliding valves (B) with on/off function. The Sliding valves allow machines to be constantly 

connected to the vacuum outputs. 

English

Instruction manual

Arms High Vacuum

PowerBox