Nederman RSR, Instruction Manual

RSR

EN

12

QMM042(02)

7 

Before installation

7.1 

Delivery checks

Check the unit for any transport damage. In case of damage or parts missing, 

notify the carrier and your local NEDERMAN representative immediately.

7.2 

Installation requirements

No specific foundation is required.

8 

Installation

8.1 

Installing the swivel chute

NEDERMAN Swivel chutes can be installed in all swarf handling systems 

which NEDERMAN designs, sells and installs, as well as in similar machine 

tools available on the market.

NOTE. 

As the RSR Swivel chute is a partly completed machinery, it must not 

be put into service until the final machinery into which it is to be incorporated 

has been declared in conformity with the provisions of the Directive 2006/42/

EC.

9 

Using the swivel chute

9.1 

Before start-up

WARNING: 

Before any kind of activity, the SAFETY REGULATIONS 

(Chapter 4) must be read carefully, and the safety regulations must be strictly 

adhered to.

9.2 

Operation

The operator should always be aware of the normal power consumption of 

the motor, normal outflow of separated material and the level of vibration. By 

considering the above mentioned factors and observing modifications one can 

be sure that the swivel chute will function properly.

10  Maintenance

Read Chapter  ‘4 Safety’ before carrying out maintenance. 

Installation, repair and maintenance work is to be carried out by qualified 

personnel using only original NEDERMAN spare parts. Contact your nearest 

authorized distributor or NEDERMAN for advice on technical service.

NOTE! 

The service intervals in this chapter are based on the unit being 

professionally maintained.