nedis IRON1000, Quick Start Manual

4

a

 Quick start guide

Steam Iron

IRON1000

For more information see the extended manual online: 

ned.is/iron1000

Intended use

This product is a steam iron that can be used on a wide range of 
fabrics.
This product is intended to remove creases and wrinkles out of 
fabric.
This product is intended for indoor use only.
Any modification of the product may have consequences for safety, 
warranty and proper functioning.
This product can be used by children aged from 8 years and above 
and persons with reduced physical, sensory or mental capabilities 
or lack of experience and knowledge if they have been given 
supervision or instruction concerning use of the product in a safe 
way and understand the hazards involved. Children shall not play 
with the product. Cleaning and user maintenance shall not be done 
by children without supervision.
The product is intended for use in household environments for 
typical housekeeping functions that may also be used by non-expert 
users for typical housekeeping functions, such as: shops, offices 
other similar working environments, farm houses, by clients in 
hotels, motels and other residential type environments and/or in 
bed and breakfast type environments.

Main parts 

(image 

A

)

1

  Power cable

2

  Burst button

3

  Spray button

4

  Steam selector

5

  Water reservoir cover

6

  Water reservoir

7

  Spray nozzle

8

  Ironing plate

9

  Steam holes

q

 Handle

w

  Back cover

e

  LED indicator

r

  Thermostat dial

t

  Measuring cup

Safety instructions

-

WARNING

• 

Ensure you have fully read and understood the instructions in 
this document before you install or use the product. Keep the 
packaging and this document for future reference.

• 

Only use the product as described in this document.

• 

Do not open the product, there are no user serviceable parts 
inside.

• 

Do not use the product if a part is damaged or defective. Replace 
a damaged or defective product immediately.

• 

Do not drop the product and avoid bumping.

• 

This product may only be serviced by a qualified technician for 
maintenance to reduce the risk of electric shock.

• 

Keep the product out of reach for children under 8 years of age 
when the product is switched on or cooling down.

• 

Do not leave the product unattended when connected to the 
power source.

• 

Place the product on a stable, flat and heat resistant surface.

• 

Do not use the product when it is visibly damaged or when it is 
leaking.

• 

Disconnect the product from the power source and allow the 
product to cool down before filling the water reservoir.

• 

Do not open the water reservoir during use.

• 

Do not immerse the product in water or other liquids.

• 

Always check that the voltage of the product corresponds to the 
mains voltage.

• 

Do not disconnect the product by pulling on the cable. Always 
grasp the connector and pull.

• 

Do not pull the power cable to move the product.

• 

Do not pull the power cable over sharp edges.

• 

Do not use chemically descaled water to fill the product.

• 

Avoid contact of the ironing plate with metal objects. The ironing 
plate can damage.

• 

Do not touch the ironing plate when using the product. The 
ironing plate is hot.

• 

Do not direct steam towards people or other living objects. The 
ejected steam is hot.

Before first use

Remove all packaging material, protective stickers and covers from 
the product.

Fill the water reservoir 

(image 

B

)

4

Use distilled water.

1.  Fill the measuring cup 

A

t

 with water.

2.  Remove the water reservoir cover 

A

5

.

3.  Empty the measuring cup 

A

t

 into the water reservoir 

A

6

.

4.  Place back the water reservoir cover 

A

5

.

Connecting the product

1.  Place the product on the back cover 

A

w

.

2.  Plug the power cable 

A

1

 into a power outlet.

4

When the product heats up for the first time, the product may 
emit some smoke. This is normal and does not affect the safety 
of the product.

Selecting the correct setting for your fabric

Do not iron items that contain this washing 

symbol.

Icon on washing 

label

Type of fabric

Thermostat dial

Nylon

Silk

Wool

Cotton

Linen

Using dry ironing

1.  Set the steam selector 

A

4

 to 

0

.

2.  Set the thermostat dial 

A

r

 to the correct setting for your fabric.

Wait until the LED indicator 

A

e

 switches off to indicate the product 

is heated up.
3.  Start dry ironing your fabric.

Using steam ironing

1.  Set the thermostat dial 

A

r

 to the 

MAX

 position.

Wait until the LED indicator 

A

e

 switches off to indicate the product 

is heated up.
2.  Set the steam selector 

A

4

 to the desired steam output.

3.  Start steam ironing your fabric.

4

Do not use steam ironing on synthetic fabric, nylon, or (synthetic) 
silk. Steam ironing these fabrics can damage the fabric.

Spraying a burst of steam

1.  Set the thermostat dial 

A

r

 to the 

MAX

 position.

2.  Press the burst button 

A

2

 to spray a burst of steam.

4

Wait at least 5 seconds between bursts of steam.

4

Do not use the steam burst button for more than 5 consecutive 
seconds.

4

Hold the product vertical and use bursts of steam to remove 
creases from hanging fabric.