2
ENGLISH
Intelligent multi tester
Specifications:
Detachable module for testing two remote points
Open/short wiring test
Connected wires display
No connection/no terminator indication
Wrong connection/non-parallel connection display
BCN terminator 25
Ω
/ 50
Ω
indication
Battery good or battery low indication
Ethernet 10BASE-2 terminator value detaction
Easily visable LED display provides operation status
One step operation
Fast reaction during test process
Palm size with carrying bag
9V battery
MAXIMUM CABLE LENGTH 600 FEET (180 m) (RJ-45/RJ-11/BNC)
Applicable cables for testing:
1. RJ-45 plug
shielded (STP) or non-shielded (UTP)
2. RJ-11 plug
6P telephone plug
3. USB plug
USB type A to USB type B
4. BNC
To test the terminator value
Operating instructions:
1. Connect one side of the plug to the main tester unit and the other side of the plug to the remote
unit (remote unit is seperatable from the main tester unit for remote testing).
2. Press the
Test button
on the main tester unit.
3. Read the status shown on the LEDs display.