5
a
Quick start guide
HDMI Splitter
VMAT3464AT
For more information see the extended manual
online:
ned.is/vmat3464at
Intended use
The Nedis VMAT3464AT is a true 1080p 4x4 HDMI matrix switch.
This product is intended to connect up to 4 HDMI inputs with up to
4 HDMI outputs and switch between them.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Main parts (image A)
1
HDMI Splitter
2
Power adapter
3
Infrared extender
4
Remote control
Front panel (image B)
1
Remote control sensor
2
HDMI input indicator LEDs
for HDMI output A
3
HDMI input indicator LEDs
for HDMI output B
4
HDMI input indicator LEDs
for HDMI output C
5
HDMI input indicator LEDs
for HDMI output D
6
Power switch
7
Select button, to switch
HDMI input (1-4) to HDMI
output A
8
Select button, to switch
HDMI input (1-4) to HDMI
output B
9
Select button, to switch
HDMI input (1-4) to HDMI
output C
10
Select button, to switch
HDMI input (1-4) to HDMI
output D
Rear panel (image C)
1
Power supply port
2
HDMI outputs (A-D)
3
HDMI inputs (1-4)
4
Infrared extender port
5
RS-232 communication port
Remote control (image D)
1
Power button
2
Select HDMI input buttons
for HDMI output A
3
Select HDMI input buttons
for HDMI output B
4
Select HDMI input buttons
for HDMI output C
5
Select HDMI input buttons
for HDMI output D
6
Auto button
7
Off button A
8
Off button B
9
Off button C
10
Off button D
Safety instructions
-
WARNING
• Do not use a damaged product.
• Only use the product as described in this manual.
• Do not expose the product to direct sunlight, naked flames or
heat.
• Do not expose the product to water or moisture.
• Place the product on a stable and flat surface.
• Do not drop the product and avoid bumping.
• Do not open the product.
• Keep the product out of reach from children.
Installation
Connection diagram
(image E)
• Connect HDMI input devices E
1
to the HDMI inputs C
2
using a HDMI cable. A HDMI input device can be for example a
DVD player, a set top box or a game console.
• Connect the HDMI output devices E
2
to the HDMI outputs
C
1
using a HDMI cable.
• Connect a RS-232 Equipped PC or Notebook E
3
to the RS-232
port C
5
.
• Connect the power supply port C
3
to a power outlet using
the supplied DC 5 V, 2 A power adapter A
3
.
Using the HDMI Splitter
Press the HDMI input buttons D
2345
to select the input for
each HDMI output (A-D).
Specifications
Product
HDMI Splitter
Article number
VMAT3464AT
Dimensions (l x w x h)
441 x 202 x 45 mm
Supported HDMI resolution
4K @ 30 Hz
1080p / 720p / 576p / 480p
Max bandwidth per channel
225 MHz
Max baud rate per display
2.25 Gbps
Input / Output DDC signal
5 V p-p (TTL)
Operating temperature
0 - 45 °C
Humidity
10 - 85% RH (no condensation)
Power supply
5 VDC / 4 A
Warranty
1 year
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product
VMAT3464AT from our brand Nedis
®
, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet
if applicable) can be found and downloaded via
webshop.nedis.com/VMAT3464AT#support
For additional information regarding the compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
