6
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your e-mail address
and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connecting to the app
1. Tap + in the top right corner in the Nedis SmartLife app.
2. Select the product type you want to add from the list.
3. Plug the micro USB cable
A
5
into the micro USB port
A
4
.
4. Plug the other end of
A
5
into a USB power source.
The Wi-Fi status LED
A
1
blinks red to indicate pairing mode is active.
4
If not, press and hold the function button
A
3
for 5 seconds to manually
enter the pairing mode.
5. Tap Next step in the app.
6. Enter the Wi-Fi network data and tap Confirm.
7. Type in a name for the product and tap Done.
The product is now ready for use.
4
For more information on how to connect and use the different sensors with
the product, consult the manual of the sensor.
Do not attempt to repair the product. If the product does not operate correctly,
replace it with a new product.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product WIFIZB10WT from our
brand Nedis
®
, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via:
nedis.com/wifizb10wt#support
WIFIZB10WT_MAN_COMP_(20222 1422)_v0_01.indd 6
18-5-2020 16:18:00
